![]() ![]() ![]() Also, depending on the nature of the liquid, it is the user responsibility to use indicated security equipment (PPE, chemical hood, …). You may be using pressurized reservoirs containing dangerous liquids and presenting explosion risks (protection glasses, security net or shield). Use security equipment adapted to specific experimental conditions.Make sure that the tube/bottle used with Elveflow pressurized tube cap is adapted to the experimental conditions (chemical compatibility of the material, resistance to temperature, …) to fulfill security requirements.We cannot guarantee that other references of tubes or bottles used by the end-user will withstand the same pressure ranges. Use only the same tube references if you need a spare one.Do not use a tube or a bottle that look damaged or has encountered a shock.Protocols and results of the tests are available upon request. Pressure resistance tests have been performed on the pressurized tanks. Recommended pressure range: from -900 mbar to 2 bar. Working with pressurized reservoirs requires to follow some recommendations to ensure your security. It is thus the responsibility of the end-user to take necessary precautions to ensure their safety, including careful handling and operation and wearing personal protective equipment. Working with systems under pressure above atmospheric pressure presents a safety risk, especially when working with hazardous liquids and gases.ĭarwin microfluidics cannot guarantee the strength of the provided reservoirs beyond atmospheric due to the nature of their material, transportation, and end-user handling methods. The schematic below illustrates a simple setup in which this reservoir kit could be used. These Falcon tube microfluidic reservoirs are intended to be used with a pressure source, pressurizing the reservoir and forcing the liquid through microfluidic tubing and into the microfluidic system, illustrated in the schematic below. Note: this product does not come with 1/4"-28 fittings or microfluidic tubing. (2x) 1/4”-28 flat bottomed Delrin plugs for blocking unused ports if needed.(1x) 50 mL BD Falcon tube microfluidic adapter with four 1/4"-28 threaded ports.(1x) 50 mL BD Falcon tube microfluidic adapter with two 1/4"-28 threaded ports.This adapter is available in two versions: Compatible with ¼-28 fittings for 1/16" OD tubing or smaller (not compatible with 1/8" OD tubing).Robust, durable design (Hard Anodized Aluminum body).So you can re-use them for as long as you wish just by using a new BD Falcon™ tube, without any risk of sample contamination. Our microfluidic caps are fully compatible with original 50 mL Corning Falcon™ tubes. These 50 mL BD Falcon™ tube caps are easily autoclavable and never come in contact with liquids. For the first time, our 50 mL BD Falcon™ Tube Adapter enables you to use disposable BD Falcon™ tubes for your microfluidic experiment. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |